User`s guide

VigorSwitch P2261 User’s Guide
154
protocol UDP/TCP
Action Parameters Indicates the classification action taken on ingress frame if
parameters configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS Class; if a frame matches the QCE it
will be put in the queue.
DPL: Classified Drop Precedence Level; if a frame matches
the QCE then DP level will set to value displayed under
DPL column.
DSCP: Classified DSCP value; If a frame matches the QCE
then DSCP will be classified with the value displayed under
DSCP column.
Other buttons You can modify each QCE (QoS Control Entry) in the table
using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of
the QCE listings.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.