User`s guide

VigorSwitch P2261 User’s Guide
142
Parameters description:
Port The port number for which the configuration below applies.
QoS class Controls the default QoS class, i.e., the QoS class for frames
not classified in any other way. There is a one to one
mapping between QoS class, queue and priority. A QoS
class of 0 (zero) has the lowest priority.
DP level Controls the default DP level, i.e., the DP level for frames
not classified in any other way.
PCP Controls the default PCP for untagged frames.
DEI Controls the default DEI for untagged frames.
Tag Class Shows the classification mode for tagged frames on this
port.
Disabled: Use default QoS class and DP level for tagged
frames.
Enabled: Use mapped versions of PCP and DEI for tagged
frames.
Click on the mode in order to configure the mode and/or
mapping.
DSCP Based Click to Enable DSCP Based QoS Ingress Port
Classification.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.