User`s guide

VigorSwitch P2261 User’s Guide
136
security mode or auto detect mode is enabled. In other
cases, it will be based on hardware aging time. The actual
aging time will be situated between the [age_time; 2 *
age_time] interval.
Traffic Class Indicates the Voice VLAN traffic class. All traffic on the
Voice VLAN will apply this class.
Port Configuration
Port Switch port number.
Mode Indicates the Voice VLAN port mode.
When the port mode isn't equal disabled, we must disable
MSTP feature before we enable Voice VLAN. It can avoid
the conflict of ingress filtering.
Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode. It detects whether there is
VoIP phone attached to the specific port and configures the
Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
Security Indicates the Voice VLAN port security mode. When the
function is enabled, all non-telephonic MAC addresses in
the Voice VLAN will be blocked for 10 seconds. Possible
port modes are:
Enabled: Enable Voice VLAN security mode operation.
Disabled: Disable Voice VLAN security mode operation.
Discovery Protocol Indicates the Voice VLAN port discovery protocol. It will
only work when auto detect mode is enabled. We should
enable LLDP feature before configuring discovery protocol
to "LLDP" or "Both". Changing the discovery protocol to
"OUI" or "LLDP" will restart auto detection process.
Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP.
Both: Both OUI and LLDP.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.