User`s guide

VigorSwitch P2261 User’s Guide
127
Parameters description:
Delete Check this box to delete the entry.
Private VLAN ID Indicates the ID of this particular private VLAN.
Port Members A row of check boxes for each port is displayed for each
private VLAN ID. To include a port in a Private VLAN,
check the box. To remove or exclude the port from the
Private VLAN, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Adding a New Private
VLAN
Click to add a new private VLAN ID. An empty row is
added to the table, and the private VLAN can be configured
as needed. The allowed range for a private VLAN ID is the
same as the switch port number range. Any values outside
this range are not accepted, and a warning message appears.
Click "Reset" to discard the incorrect entry.
The Private VLAN is enabled when you click "Apply".
The button can be used to undo the addition of new Private
VLANs.
After finished the above settings, click Apply to save the configuration. The settings will
take effect.