User`s guide

VigorSwitch P2261 User’s Guide
113
Parameters description:
Primary Power Supply
[W]
The switch can have PoE power supplies. It is used as
power source, For being able to determine the amount of
power the PD may use, it must be defined what amount of
power the power sources can deliver.
Port This is the logical port number for this row.
PoE State The PoE Mode represents the PoE operating mode for the
port.
Disabled: PoE disabled for the port.
Enabled : Enables PoE IEEE 802.3af/at.
Priority The Priority represents the ports priority. There are three
levels of power priority named Low, High and Critical.
The priority is used in the case where the remote devices
requires more power than the power supply can deliver. In
this case the port with the lowest priority will be turn off
starting from the port with the highest port number.
Maximum Power The Maximum Power value contains a numerical value that
indicates the maximum power in watts that can be delivered
to a remote device.
NOTE: If you want to set the Port support IEEE802.3at
then you can set the Maximum allowed value is 30W.
Detection Allows you to choose power supply mode (Legacy and
4-Point).
Reset Rest the PoE status.
2
2
.
.
3
3
.
.
3
3
5
5
P
P
o
o
E
E
–
–
S
S
t
t
a
a
t
t
u
u
s
s
Function name:
PoE –Status