User`s guide

VigorSwitch P2261 User’s Guide

z Built-in web-based management and CLI management, providing a more

convenient UI for the user

z Supports port mirror function with ingress/egress traffic

z Supports rapid spanning tree (802.1w RSTP)

z Supports multiple spanning tree (802.1s MSTP)

z Supports 802.1X port security on a VLAN

z Supports IP-MAC-Port Binding for LAN security

z Supports user management and only first login administrator can configure the device.

The rest of users can only view the switch

z SNMP access can be disabled and prevent from illegal SNMP access

z Supports Ingress, Non-unicast and Egress Bandwidth rating management with a

resolution of 1Mbps

z The trap event and alarm message can be transferred via e-mail

z Supports diagnostics to let administrator knowing the hardware status

z Supports loop detection to protect the switch crash when the networking has looping

issue

z HTTP and TFTP for firmware upgrade, system log upload and configuration file

import/export

z Supports remote boot the device through user interface and SNMP

z Supports NTP network time synchronization and daylight saving

z Supports 120 event log records in the main memory and display on the local console

Before you start installing the switch, verify that the package contains the following:

z VigorSwitch P2261

z AC

Power Cord

z CD

z Console Cable

z Rubber feet

z Rack mount kit

Please notify your sales representative immediately if any of the aforementioned items is

missing or damaged.

In the switch, Port 21~24 includes two types of media --- TP and SFP Fiber (LC, BiDi

LC…); this port supports 10/100/1000Mbps TP or 1000Mbps SFP Fiber with auto-detected

function. 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion;

the following are optional SFP types compatible for the switch:

z 1000Mbps LC, MM, SFP Fiber transceiver

z 1000Mbps LC, SM 10km, SFP Fiber transceiver

z 1000Mbps LC, SM 30km, SFP Fiber transceiver