Quick Start Guide

ManualsBrandsDraytek ManualsElectronicsDual Band Security Firewall

Quick Start Guide

Version: 1.0

F/W: V1.3.0

Date: March 27, 2018

Warranty

We warrant to the original end user (purchaser) that the access point will be free from any defects in workmanship or

materials for a period of one (1) year from the date of purchase from the dealer. Please keep your purchase receipt in

a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase,

should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for either parts or labor, to whatever extent

we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or

re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This

warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to

abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors.

Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes from time to time in the contents

hereof without obligation to notify any person of such revision or changes.

Declaration of Conformity

Hereby, DrayTek Corporation declares that the radio equipment type VigorAP 903 is in compliance with Directive

2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

http://www.draytek.com.tw/ftp/VigorAP 903/Document/CE/

Manufacturer: DrayTek Corp.

Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303

Product: VigorAP 903

Frequency Information for Europe area:

2.4G WLAN

2412MHz - 2472 MHz, max. TX power: 19.86dBm

5G WLAN

5180MHz - 5700 MHz, max. TX power: 29.86dBm

Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/ CY/LV/LI/LT/ LU/HU/MT/

NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/ UK/HR. 5150MHz~5350MHz is for indoor use only.

This product is designed for 2.4GHz/5GHz WLAN network throughout the EC region.

Summary of content (12 pages)

PAGE 1
VigorAP 903 Dual Band Security Firewall Quick Start Guide Version: 1.0 F/W: V1.3.0 Date: March 27, 2018 Warranty We warrant to the original end user (purchaser) that the access point will be free from any defects in workmanship or materials for a period of one (1) year from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.
PAGE 2
Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Access Point Antenna RJ-45 Cable (Ethernet) Quick Start Guide The type of the power adapter depends on the country that the AP will be installed: UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type Power Adapter Note The antenna/transmitter should be kept at least 20 cm away from human body.
PAGE 4
Descriptions of Components LED ACT LAN A1 - A4 Status Off Blinking On Blinking On Off Blinking On Off Blinking On LAN B Off Blinking On USB 2.4G 5G Off Blinking Explanation The system is not ready or is failed. The system is ready and can work normally. A USB device is connected and active. The data is transmitting. Wireless function is ready. Wireless function is not ready. Data is transmitting (sending/receiving). Wireless function is ready. Wireless function is not ready.
PAGE 5
Interface LAN B LAN A4, A3, A2 A1 (PoE) Description Wireless band will be switched /changed according to the button pressed and released. For example,  2.4G (On) and 5G (On) – in default.  2.4G (Off) and 5G (On) – pressed and released the button once.  2.4G (On) and 5G (Off) – pressed and released the button twice.  2.4G (Off) and 5G (Off) – pressed and released the button three times. WPS - When WPS function is enabled by web user interface, press this button for more than 2 seconds.
PAGE 6
Installation This section will guide you to install the AP through hardware / wall-mounting connection. For hardware connection, refer to the following steps to connect your devices correctly. 1. Connect VigorAP 903 to xDSL modem, router, or switch/hub in your network through the LAN B port of the access point by Ethernet cable. Note You can also connect VigorAP 903 to a Vigor router via wireless connection. For detailed information, refer to VigorAP 903 User’s Guide. 2.
PAGE 7
For wall-mounting, refer to the following steps. 1. Drill two holes on the wall. The distance between the holes shall be 80mm. The recommended drill diameter shall be 6.5mm (1/4”). 2. Fit screws into the wall using the appropriate type of wall plug. 3. Hang the VigorAP directly onto the screws.
PAGE 8
Configuring Web Pages This section will guide you to configure AP settings through web browser. 1. Make sure your PC connects to the router correctly. 2. Open a web browser on your PC and type http://192.168.1.2. A pop-up window will open to ask for username and password. Pease type “admin/admin” on Username/Password and click Login.
PAGE 9
3. The Main Screen will pop up. Click Quick Start Wizard. 4. This page displays general settings (enable/disable wireless LAN 2.4GHz/5GHz) for the operation mode selected.
PAGE 10
5. The first page is set for 2.4G wireless connection. There are five operation modes for you to choose. Simply click any one of modes. In this example, choose AP and click Next to configure the following page. 6. After finished the configuration for wireless LAN (2.4GHz) and click Next, you need to configure the following page for wireless LAN (5GHz).
PAGE 11
7. In the next page, click Finish. The system will make a connection automatically. Open Online Status to see the result of network connection. Note Under System Maintenance, you can change the access point’s default admin password. You should do this immediately in order to prevent users from accessing the VigorAP’s management interface and changing settings.
PAGE 12
Contacting DrayTek If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. Safety Instructions  Read the installation guide thoroughly before you set up the access point.  The access point is a complicated electronic unit that may be repaired only be authorized       and qualified personnel. Do not try to open or repair the modem yourself.