VigorAP 902 802.11ac Access Point Quick Start Guide Version: 1.0 F/W: V1.1.5 _RC3 Date: November 27, 2015 Warranty We warrant to the original end user (purchaser) that the access point will be free from any defects in workmanship or materials for a period of one (1) year from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.
Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Access Point Antenna RJ-45 Cable (Ethernet) Quick Start Guide The type of the power adapter depends on the country that the AP will be installed: UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type Power Adapter Note The antenna/transmitter should be kept at least 20 cm away from human body.
Descriptions of Components LED ACT LAN A1 - A4 Status Off Blinking On Blinking On Off Blinking On Off Blinking On LAN B Off Blinking On USB 2.4G 5G Off Blinking Explanation The system is not ready or is failed. The system is ready and can work normally. A USB device is connected and active. The data is transmitting. Wireless function is ready. Wireless function is not ready. Data is transmitting (sending/receiving). Wireless function is ready. Wireless function is not ready.
Interface 0/1 Description Power switch. PWR: Connecter for a power adapter. LAN B Connecter for xDSL / Cable modem (Giga level) or router. LAN A4, A2, A1 Connecter for xDSL / Cable modem (Giga level) / computer or router. A3 (PoE) LAN A3 is used for PoE connection (for indoor use). WLAN ON/OFF WPS Wireless band will be switched /changed according to the button pressed and released. For example, 2.4G (On) and 5G (On) – in default. 2.4G (Off) and 5G (On) – pressed and released the button once.
Installation This section will guide you to install the AP through hardware connection and configure the settings through web browser. Before starting to configure the router, you have to connect your devices correctly. 1. Connect VigorAP 902 to xDSL modem, router, or switch/hub in your network through the LAN A port of the access point by Ethernet cable. Note You can also connect VigorAP 902 to a Vigor router via wireless connection. For detailed information, refer to VigorAP 902 User’s Guide. 2.
Configuring Web Pages 1. Make sure your PC connects to the router correctly. 2. Open a web browser on your PC and type http://192.168.1.2. A pop-up window will open to ask for username and password. Pease type “admin/admin” on Username/Password and click Login. 3. The Main Screen will pop up. Click Quick Start Wizard.
4. The first page is set for 2.4G wireless connection. There are five operation modes for you to choose. Simply click any one of modes. In this example, choose AP and click Next. 5. For the SSID configuration, choose the mode you want and type related information for client authentication. Then, click Next.
6. Next, the following page is set for 5G wireless connection. There are three wireless modes for you to choose. The default is Mixed(11a+11n+11ac). Change the information listed in this page according to the data offered by your ISP. Then click Next. 7. For the SSID configuration, choose the mode you want and type related information for client authentication. Then, click Next.
Default Pre-Shared Key (PSK) with 13 ASCII characters is provided and stated on the label pasted on the bottom of VigorAP. Note For the communication, all wireless devices must support the same encryption bit length and share the same key. If WEP mode is selected, only one of four preset keys can be selected at one time. 8. In the next page, click Finish. The system will make a connection automatically. Open Online Status to see the result of network connection.
Contacting DrayTek If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. Safety Instructions Read the installation guide thoroughly before you set up the access point. The access point is a complicated electronic unit that may be repaired only be authorized and qualified personnel. Do not try to open or repair the modem yourself.
