Quick Start Guide

3.2 Vigor2915Fac
3.2 Vigor2915Fac
LED Status Explanation
ACT Blinking The router is powered on and running normally.
Off The router is powered off.
Internet On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
W2/P4 On The WAN/LAN port is connected.
Off The WAN/LAN port is disconnected.
Blinking The data is transmitting.
P3~P1 On The LAN port is connected.
Off The LAN port is disconnected.
Blinking The data is transmitting.
W1 On SFP module is plugged and the fiber link is up.
Off SFP module is unplugged or the fiber link is down.
Blinking The data is transmitting.
USB On USB device is connected and ready for use.
Blinking The data is transmitting.
WISPr On Wi-Fi WAN connected.
Off Wi-Fi WAN disconnected.
Blinking The data is transmitting.
2.4G/5G On Wireless access point with bandwidth of 2.4GHz/5GHz is
ready.
Blinking It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and simultaneously
when WPS is working, and will return to normal condition
after two minutes. (You need to setup WPS within 2
minutes.)
5