Quick Start Guide

No.

Interface Description

Wireless LAN

ON/OFF/WPS

Wireless band will be switched /changed according to the

button pressed and released. For example,

 2.4G (On) and 5G (On) – in default.

 2.4G (Off) and 5G (On) – pressed and released the

button once.

 2.4G (On) and 5G (Off) – pressed and released the

button twice.

 2.4G (Off) and 5G (Off) – pressed and released the

button three times.

When WPS function is enabled by web user interface, press

this button for more than 2 seconds to wait for client’s

device making

network connection through WPS.

(3)

Factory Reset

Restore the default settings. Usage: Turn on the router

(ACT LED is blinking). Press the hole and keep for more than

5 seconds. When you see the ACT LED begins to blink rapidly

than usual, release the button. Then the router will restart

with the factory default configuration.

(4) USB1~2 / USB

Connecter for a USB device (for 3G/4G USB Modem or

printer or thermometer).

WAN2 / P6

Connecter for local network devices or modem for

accessing Internet.

The port “WAN2 / P6” is switchable. It can be used for LAN

connection or WAN connection according to the settings

configured in WUI.

(5)

LAN P1-P5

Connecters for local network devices.