Quick Start Guide

4
Interface Description
WLAN
ON/OFF/WPS
WLAN On - Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless function is not
ready, the LED will be off.
WPS - When WPS function is enabled by web user interface,
press this button for more than 2 seconds to wait for client’s
device making network connection through WPS.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole
and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then
the router will restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
P1~P4 Connectors for local networked devices.
DSL
Connector for accessing the Internet.
I/O
Power Switch.
PWR Connector for a power adapter.