Quick Start Guide

6
Interface Description
WLAN
ON/OFF/WPS
WLAN On - Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED will be
on.
WLAN Off - Press the button and release it within 2 seconds
to turn off the WLAN function. When the wireless function is
not ready, the LED will be off.
WPS - When WPS function is enabled by web user interface,
press this button for more than 2 seconds to wait for client’s
device making network connection through WPS.
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release the
button. Then the router will restart with the factory default
configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or
printer).
P1~P4 Connectors for local networked devices.
DSL
Connector for accessing the Internet.
Phone2/Phone1
Connector of analog phone for VoIP communication.
I/O
Power Switch.
PWR Connector for a power adapter.