Specifications

operator’s manual
5
Using the SDX100
Front Panel Overview
The easiest way to navigate the SDX100 is to imagine it in five sections
Input
Input Meters 0 to -31dB
The Input Meters, located on the left of the GUI,
represents the incoming signal from Soundscape
and is displayed by 32 led bar meters. A range
of 0 to -31dB is shown as well as input overload
leds.
Input Gain Sliders -7dB to +18dB
The input Gain Sliders directly correspond with
the Input Meters above. The sliders range from -
7dB to +18dB with the level shown in text
between the sliders and the meters. Set the input
gain so that the meters only hit 0dB on rare
excessive signal peaks.
+ and - Nudge Buttons
Use the + button to increase the level of the
input gain by 0.25dB per press, and the - button
to decrease it.
Input Compressor/Limiter Output
Noise Gate Expander
Using the SDX100