Owners Manual

8
DRAWMER
AUDIO CONNECTIONS
• Interference:
If the unit is to be used where it maybe exposed
to high levels of disturbance such as found
close to a TV or radio transmitter, we advise
that the unit is operated in a balanced
configuration. The screens of the signal cables
sh ould be connec ted to the chassis
connection on the XLR connector as opposed
to connecting to pin1. The MC3.1 conforms to
the EMC standards.
• Ground Loops:
If ground loop problems are encountered,
never disconnect the mains earth, but instead,
try disconnecting the signal screen on one end
of each of the cables connecting the outputs of
the MC3.1 to the patchbay. If such measures
are necessary, balan ced op eration is
recommended.