Manual

23
MC2.1 - Monitor Controller
CHAPTER 3
SPECIFICATION
Note: These specfications are provisional
and may alter slightly upon product
release.
INPUT
Maximum Input Level 21dBu
OUTPUT
Maximum Output Level
before clipping 27dBu
DYNAMIC RANGE
@ unity gain 118dB
CROSSTALK
L/R @ 1kHz >85dB
Adjacent Input >95dB
THD & NOISE
unity gain 0dBu input
0,001 4%
FREQUENCY RESPONCE
20Hz-20kHz +/- 0.2dB
PHASE RESPONSE
20Hz-20kHz +/- 2degrees max
POWER REQUIREMENTS
115V or 230V at 50-60Hz, 20VA
Voltage set by internal voltage switch
FUSE RATING
@ 115V T315mA
@ 230V T160mA
Conforming to IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Slo-Blo,
250Volt working
CASE SIZE
Depth (with Controls
& Sockets) 272mm
Width 215mm
Height (with Feet) 81mm
WEIGHT 2.5kg
For warranty service please call Drawmer
Electronics Ltd. or their nearest authorised
service facility, giving full details of the difficulty.
A list of all main dealers can be found on the
Drawmer webpages.
On receipt of this information, service or
shipping instructions will be forwarded to you.
No equipment should be returned under the
warranty without prior consent from Drawmer
or their authorised representative.
For service claims under the warranty
agreement a service Returns Authorisation
(RA) number will be issued.
Write this RA number in large letters in a
prominent position on the shipping box.
Enclose your name, address, telephone
number, copy of the original sales invoice and
a detailed description of the problem.
Authorised returns should be prepaid and must
be insured.
All Drawmer products are packaged in
specially designed containers for protection.
If the unit is to be returned, the original
container must be used. If this container is not
available, then the equipment should be
packaged in substantial shock-proof material,
capable of withstanding the handling for the
transit.
CONTACTING DRAWMER
Drawmer Electronics Ltd., will be pleased to
answer all application questions to enhance
your usage of this equipment.
Please address correspondence to:
Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK
Alternatively contact us by E-mail on :
[e-mail]
Further information on all Drawmer dealers,
Authorised service departments and other
contact information can be obtained from our
web pages on:
http://www.drawmer.com
MC2.1 GENERAL INFORMATION
IF A FAULT DEVELOPS