User guide

38
CHAPTER 8
DC2476 DATA
SPECIFICATION
Analogue Input
Connectors XLR Balanced (Pin 2 Hot)
Impedance 10 KΩ
Max. Input Level +21 dBu
Input CMR Better than -50dB
A to D Conversion 24 Bit
Dynamic Range A/D -112dB Unweighted at 48KHz
Crosstalk -80dB @ 10Hz to 20kHz
Analogue Output
Connectors XLR Balanced (Pin 2 Hot)
Impedance 50 Ω
Max. Output Level +21 dBu
Output Balance -35dB@1KHz
D to A Conversion 24 Bit
Dynamic Range -108dB Unweighted
THD <0.008%@1KHz, +10dBu
Frequency Response 96kHz 7Hz - 44kHz
@ -1dB 88kHz 7Hz - 41kHz
48kHz 7Hz - 22kHz
44.1kHz 7Hz - 20kHz
32kHz 7Hz - 15kHz
Crosstalk -80dB @ 10Hz to 20kHz
Digital Inputs and Outputs
AES/EBU In/Out XLR
S/PDIF In/Out Coaxial, RCA Type
Sample Rates 32, 44.1, 48, 88.2 and 96KHz
Word Clock Input Impedence 75 Ω
Output Impedence 33 Ω
PC- Card Interface
Connector Type 1 PCMCIA SRAM card
Standards PC-Card 2.0, Jeida 4.0 standard
Card Format upto 256Kb.
Internal Battery
Type Varta Mempac Ni-MH
Rating 3.6V 150mAh
Control Interface
MIDI In/Out/Thru: 5 Pin DIN
General
Power Requirements 30VA
Fuse Rating T500mA for All voltages.
CONFORMING TO:
IEC 127-2
Fuse Type 20mm x 5mm, Class 3 Slow - Blow
250Volt working
Case Size (mm) 482(w) x 44(h) x 250(d)
Weight (incl packaging) 5KG