Operating instructions

220V Ultimate Access by Draper Page 3 of 4
Case Dimensions
Tab-Tension Adjustment Procedure for Ultimate Access/Series V
① Determine which side requires adjustment.
② Secure dowel with one hand.
Caution: Do not touch or bend surface.
③ Using Philips-head screwdriver, depress spring-loaded adjustment
screw (see drawing) and slowly turn clockwise to tighten tension, or
counterclockwise to loosen tension. The screw adjusts in ¼ turn
increments. Adjust only one increment (¼ turn).
④ If problem is not corrected, leave screen in position for 24 hours to allow
surface material to stretch into position.
⑤ If problem still is not corrected, repeat steps 2 and 3.
Dowel
Adjustment
Screw
Tensioning
Cable
www.draperinc.com
(765) 987-799
9
2
1
/8"
25
mm
121
mm
191 mm
229 mm
203 mm
16
mm
173
mm
254
mm
243
mm
Series V
Viewing Surface
Series E Series V
*L = 208
mm Varies
Ceiling tile
(by others)
Mounting brackets slide
left and right as needed.
Series E
Viewing Surface
L*
Alternative mounting configuration
243
mm