Specifications

Pump Cage
Allows solids to enter the
pump but stops those too
large from passing through.
Inlet Hosetail
Not present on all filter pumps. Allows
connection to a skimmer or satellite
strainer so the pump sucks water from
the skimmer.
Cage Clips
The cage opens
for cleaning and
maintenance.
Ball Joint
Point the hose in any
direction.
Outlet Hosetail
Connect the hose here and direct the
water to the filter or waterfall. Trim the
hosetail page 35.
29
To see our extensive range and to order online visit www.bradshawsdirect.co.uk
When choosing consider
Solids Handling
- the
size of particles that can pass
through the pump – the bigger
the number the less often it will
block up.
Running Cost - filter pumps
must run 24 hours a day so
low wattages can mean big
savings.
Extra Features - some
pumps have two inlets and can
be used with a skimmer, some
can protect the wildlife in your
pond from harm. Have a look
at the pump description for
details.
All our filter pumps come with 10
metres of cable for connection to the
mains and we advise a circuit breaker
(RCD) for safety. They can also take
different hose sizes. Always use the
biggest hose size that your pump and
filter will allow or you'll lose flow rate.