Specifications

ManualsBrandsDraper ManualsPower ToolsSWP120

To see our extensive range and to order online visit www.bradshawsdirect.co.uk

Concrete Ponds

Colour Weight Price

Clear 500g £11.99

Clear 1kg £20.99

Clear 2.5kg £41.99

Clear 5kg £67.99

Colour Weight Price

Black 500g N/A

Black 1kg £26.99

Black 2.5kg £57.99

Black 5kg £94.99

Just Fix It

Two-part putty for repairing

cracks and holes in concrete,

statues, pipe and waterfalls. Sets

hard, even sets under water.

£7.99

Render Reinforcement Fibres

Used in the construction of concrete ponds

to add strength and dramatically reduce

cracking, these 6mm polypropylene fibres

should be added to the final layer of mortar.

Approximately 20g of fibres are needed per

kilogram of mortar. Supplied in 900g bags;

enough for 45Kg of mortar.

£17.99

Fibres for concrete also available, see our website for

details.

G4 Concrete Pond Sealer

If you have decided to make your pond from concrete then you will need to

seal the top layer of render to stop the water getting in and the lime, which

is harmful to fish, getting out. The best way to do this is with G4 Sealer. You

don't need a primer, just paint it straight onto the concrete. There is a choice

of clear (dries translucent) or black. You can also use G4 to coat flagstones,

waterfalls, statues and other concrete products to make them safe for your

pond.

The strongest type of pond. If you get it right first time your pond will last for many years.

However, this method of construction can be technically difficult, expensive and

time-consuming. Foundations must be reinforced and the final layer of render should include

reinforcement fibres and be sealed with G4 or Lotus Ultimate Concrete Pond Sealer.

Clear: 3 coats – a total of 550g per square metre (g/m²) that you will cover.

Black: 2 coats of Clear first then two coats of Black. That's 410g/m² of Clear and 400g/m² of Black.

Lotus Ultimate

Glassfibre Restorer

Black or green from

£57.99 to cover 7m²

Visit our website for details