User guide

207CL–Customer Lookup HP–Home Page PIN–Personal Identification Number VI–Visual Invoice

PERFORMING AN INVENTORY WITH LOCATION SCAN

The Normal mode discussed above captures inventory without requiring

conveyor location information. There are two additional modes available

that compare orders to assigned conveyor locations. The advantage to

performing an inventory with location checking is identifying misfiled

conveyor orders. The inventory mode is changed by pressing the Normal

button, cycling through each of the three modes:

•

NormalNormal

Normal—No locations are captured.

•

Rack EachRack Each

Rack Each—Capture locations by scanning each invoice/rack

location pair in a similar fashion to the racking function.

•

Rack MultiRack Multi

Rack Multi—Capture locations by first scanning a location and

then each invoice at the same location. Scanning a new location

causes all subsequent invoice scans to be paired with that new

location. This mode is useful when multiple orders are assigned to a

single conveyor link rather than individual link slots.

Transferring data in this mode is similar to the Normal inventory

function, except that prior to selecting SPOTscan Sync, the Do Not

Expect Scanned Locations (in the upper right corner) must be selected to

indicate Expect Scanned Locations.

Processing Steps

Processing step scanning is similar to the order Racking function and

scans orders through one or more user-definable processing steps.

SPOTscan Display—

PrPr

ocessing Step Vocessing Step V

ocessing Step V

iewiew

iew