Owner`s manual

- 8 -
OPERATION AND USE Cont’d.
DIRECTION OF CUT
When beginning to cut, insert the cutter slowly to
the selected depth and start up in a forward
motion, holding the machine with both hands.
Starting the cutter in the wrong direction could
cause the machine to ricochet, and this may lead
to damage of the work piece (Fig.8).
IMPORTANT – DUST EXTRACTION FACILITY
Draper Tools recommends that the dust extraction
facility is used in conjunction with a suitable
vacuum cleaner or dust collector, see Fig.9.
Recommended Draper models:WDV24,
WDV1100, SWD1100, DE2000, DE1045 & DE1030.
ALWAYS DISCONNECT FROM THE POWER
SUPPLY BEFORE CLEANING OR
MAINTAINING YOUR ROUTER.
IMPROPER USE
The functions and use of this tool are those
exclusively indicated in this manual. ANY OTHER
USE OF THE TOOL IS EXPLICITLY
FORBIDDEN.
Fig.8
Rotation
Rotation
Feed
Feed
Fig.9