Owner`s manual

● Place the router on the part that is to be worked on.
● Adjust the cutting depth.
● Fix the guide bar E in the base plate D using wing screws B.
● Fit the deviders C and lock using the “butterfly” nut.
● Determine the radius and set the required length, then lock the wing screw B.
● Take the deviders to the pivoting point.
● Start the machine.
● Loosen the plunge lock A and move the machine vertically to the stop, then
retighten the plunge lock A.
● Holding the router by both handles, you can now start work. The router is fed in an
anti-clock direction.
● When you have finished working, unscrew Plunge lock A to raise the machine.
● Switch off machine
- 9 -
OPERATION AND USE Con’d