Owner`s manual

ManualsBrandsDraper ManualsDo-It-Yourself toolsGD13/5C

OPERATION AND USE

NO-VOLT ON/OFF SWITCH: (Fig 12)

The drill is fitted with a no-volt switch with an

emergency shut-off cover

❃✌

.

In the event of an emergency, closing the cover

firmly will cause the stop button to be

triggered, thus stopping the machine. To re-

open the cover, the red button requires sliding

up which in turn will release the stop button.

In the event of a power failure the drill press

will have to be manually re-started.

To switch the drill press on, lift up the sprung

cover and push the button marked

✲✌

.

To switch the drill press off, lift up the sprung

cover and push the button marked

✸✌

.

To switch the drill press off in an emergency

strike the cover firmly which will trigger the

✸✌

button.

- 11 -

❃✌

Fig.12.