Installation Instructions

Phantom Video Projector Lift for Tabletop Installation by Draper, Inc. page 2 of 4
www
.draperinc.com [phone]
Electrical Connections
Unit operates on 24V DC.
The Phantom is shipped closed.
Please note: Make sure electrical supply has been disconnected before
attempting to connect Phantom to electricity.
Connections should be made in accordance with wiring diagram, and wiring
should comply with national and local electrical codes. All operating switches
should be “off” before power is connected.
110V or 220V AC for projector must be supplied by others. Phantom should
be operated and checked prior to installing projector.
Operation
Unit is automatically supplied with a DC Motor Control and a three-button
up-stop-down wall switch. When unit is first operated, be cautious! If unit fails
to operate when the “up” button is pressed, press “off” and recheck electrical
connections before proceeding. Cycle unit down and up several times to
confirm satisfactory operation.
DC Motor Control (CE Approved)—In addition to standard wall switch and
Obstruction Shutoff adjustment, allows optional remote control, RS232 or
Ethernet connection. Included as standard.
Optional Infrared or Radio Frequency Remote Control (CE Approved)—A
three-button transmitter is provided, with “up”, “down”, and “stop” buttons.
Unit starts opens or closes when appropriate button is pressed, and may be
stopped by pressing “off” button. When using RF or IR control, a three-button
up-stop-down wall switch is also recommended and optionally available.
Optional RS232 (CE Approved)—Serial communication optionally available
with wall switches, RF or IR remote.
Optional Ethernet (Not CE Approved)—Network communication optionally
available with wall switches, RF or IR remote.
Closed
Open
Phantom Tabletop Operation
23
1
/
8
"/58.7 cm
(30
5
/8"/77.8 cm)
1
/2"/1.27 cm
15
7
/8"/40.3 cm
(19
3
/4"/50.2 cm)
14
13
/16"/37.6 cm
(18
3
/4"/47.6 cm)
16
3
/16"/41.1 cm
(20
1
/4"/51.4 cm)
8
1
/8"/20.6 cm
(8
1
/8"/20.6 cm)
5"/12.6 cm
(5"/12.6 cm)
1
1
/4"/3.2 cm
(1
1
/16"/2.7 cm)
15"/38.1 cm
(18
15
/16"/48.1 cm)
25
9
/16"/65 cm
(32
3
/4"/83.2 cm)
Phantom Tabletop—Dimensions
Please note:
non-bracketed
dimensions
are for Model
A; bracketed
dimensions are
for Model B.
Views from top