Operating instructions

- 7 -
IMPORTANT:- For your own safety turn the power switch off and remove the plug from the supply outlet
before maintaining your dust extractor.
REPLA
CING FIL
TERS:-
Remove the motor housing ✯✌, by releasing the two
locking clips, ✰✌ Fig.4.
Using the handle ✱✌, lift the motor housing clear to
expose both the cartridge filter ✳✌ and the cloth filter
✴✌ Fig.5.
Fit the new filter and lock the motor housing into
position.
Re-connect to the power supply.
NOTE:- The DE2000 is fitted with two cartridge filters,
both should be replaced.
CLEANING
THE FILTER:-
CARTRIDGE FILTER:- This can be cleaned by two
methods.
1. Brush the dust off the filter
(do not do this in the working
area).
2. Vacuum dust off using
another vacuum cleaner.
CLOTH BAG FILTER:- This can be cleaned by three
methods.
1. Shake the bag until all the
dust hasgone (do not do this
in the working area).
2. Vacuum dust off using
another vacuum cleaner.
3. Shake clean and then wash
(ensure the filter is dry
before re-fitting).
IMPORTANT
Do not use the hazardous dust extractor without the three filters fitted. They are (1) Hepa Cartridge Filter
(2) 14" Dacron Filter Bag (3) Dust Collecting Paper Bag.
NOTE: If any of the filters are damaged or holed, they must be replaced.
IMPORTANT
All repairs/adjustments should be carried out by a qualified person.
IMPORTANT DE1030H
This hazardous dust extractor will not be repaired/handled by Draper Tools or by their warranty agents
until the machine has been cleaned and certified by a decontamination organisation.
It is the responsibility of the user to have the machine decontaminated.Your local company can be found
in the telephone directory under plant and machinery.
Please note all repairs/adjustments should be carried out by a qualified person.
Draper Power Helpline [phone].
MAINTENANCE
✯✌
✱✌
✰✌
Fig.4.
Fig.5.
✴✌
✳✌