Specifications

27
Force Feed Oil Cans
Oil cans supplied with fitted flexible spout and a loose
interchangeable rigid spout. Sold loose.
Stock Euro GBP £
No. Capacity each each
21716 125ml €5.43 £3.62
21717 200ml €5.73 £3.82
21718 300ml €6.63 £4.42
21719 500ml €8.22 £5.48
21720 700ml €9.06 £6.04
1
BP
Lever Action Barrel Pump
For use with steel barrels capacity 100 to 205L
maximum. Aluminium diecast head and bung nut with
zinc plated curved discharge spout 35mm diameter and
lever handle. The telescopic suction tube (supplied)
attaches to base of pump to reach bottom of barrel.
Display carton.
NB:Not for use with petroleum or diesel fuels
Stock Euro GBP £
No. each each
63857 €37.05 £24.70
2
N130
Twin Leg Reversible Pullers
Puller with two reversible legs for external and internal
pulling of gears, bearings, etc. Legs are forged carbon
steel and have long and short reach facility. Yoke and
thrust bolt are manufactured from carbon steel. Screw
has a rolled thread with chemically blacked finish.
Display packed.
Stock Max. Max. Euro GBP £
No. Reach Spread each each
13906 65mm 75mm €16.74 £11.16
13907 102mm 110mm €20.22 £13.48
43923 165mm 160mm €34.86 £23.24
3
N133
Triple Leg Reversible Pullers
Puller with three reversible legs for external and
internal pulling of gears, bearings, etc. Legs are forged
carbon steel and have long and short reach facility.
Yoke and thrust bolt are manufactured from carbon
steel. Screw has a rolled thread with chemically blacked
finish. Display packed.
Stock Max. Max. Euro GBP £
No. Reach Spread each each
13908 65mm 75mm €24.09 £16.06
13909 102mm 110mm €30.33 £20.22
43949 165mm 160mm €47.22 £31.48
5
Twin/Triple Reversible Pullers
Puller with two reversible legs for external and internal
pulling of gears, bearings, etc. Legs are forged carbon
steel and have long and short reach facility. Yoke and
thrust bolt are manufactured from carbon steel. Screw
has a rolled thread with chemically blacked finish.
Supplied with twin and triple yoke that will take either
two or three legs. Display packed.
Stock Part Max. Max. Euro GBP £
No. No. Reach Spread each each
25994 N134 78mm 100mm €36.24 £24.16
56177 N136 150mm 100mm €42.27 £28.18
4
BSD/SET
10 piece Bearing and Seal Driver Set
For the installation of bearings and seals. Helps avoid
damage to bearing and seal faces. Packed in blow
mould case and display sleeve.
Contents:
• 9 x aluminium drive flanges size: 39.5, 44.5, 50, 59, 63, 65, 72,
76 and 81mm
• aluminium mandrel drive
Stock Euro GBP £
No. per set per set
56637 €94.59 £63.06
6
HPK
10 Tonne Hydraulic Puller Kit
Six position multi-function puller with adjustable two
or three leg function. Allows bearings, gears, etc. to be
removed with minimal effort by use of the hydraulic
puller. Supplied complete with instruction manual.
Packed in blow mould carrying case with display sleeve.
Contents:
• hydraulic pump
• 3 puller legs
• 6 nuts and washers
• 6 link plates
•
2
/ 3 leg puller yoke
• nose adaptor
• Min/Max Reach 0 - 150mm
• Min/Max Spread 100 - 240mm
Stock Euro GBP £
No. per kit per kit
50094 €158.94 £105.96
7
section 2
grease guns/oil cans and pullers

105
Prices are list, each and exclude VAT.
pullers
product locator
Air Grease Guns are also
available. See Section 9
‘Air Tools’