Specifications

376A
Diesel Engine Compression Testing Kit
Allows the compression of a diesel engine (direct or
indirect fuel injection) to be tested by cranking or
running. Small profile for speed. Pressure release for
repetitive tests. Display packed in blow mould case.
Contents:
• Dual reading 80mm diameter scale measuring 0-1000psi/ 0-
70bar, with 355mm of flexible hose, side air release valve and
female quick release coupling (to BS)
• 5 x glowplug adaptors: M10x1.25 (2), M10x1.0, M12x1.25,
M14x1.25 and M20x1.5
• 4 x injector adaptors: M20x1.5, M24x2.0, Stanadyne D1 type
• 90° elbow
• replacement seal and washer set
• 25mm clamp plate
Stock Euro GBP £
No. per kit per kit
65146 €279.45 £186.30
1
4495
GM (Vauxhall/Opel) Diesel Engine
Setting and Locking Pins
Expert Quality , for flywheel and crankshaft TDC setting.
For use on X17DTL 1.7 diesel engines. Kit comprises TDC
plate and locking pins. Anodized finish for corrosion
protection. Display packed.
Stock Euro GBP £
No. each each
66238 €30.48 £20.32
2
4494
Ford Diesel Engine Camshaft
Setting/Locking Plate
Expert Quality , for use on 1.8 diesel engines fitted in
Fiesta 1.8D, Escort 1.8D/1.8TD and Mondeo 1.8TD
vehicles. Anodized finish for corrosion protection.
Display packed.
Stock Euro GBP £
No. each each
66237 €9.63 £6.42
3
CLT-GM
GM (Vauxhall/Opel) Diesel Engine
Camshaft Locking Tool
Expert Quality , allows camshaft alignment to be set
without altering TDC position. For use on mark I/II 1.6
and 1.7 OHC diesel engines fitted to GM
(Vauxhall/Opel) Corsa (Nova), Astra/Belmont (Kadett)
and Vectra (Cavalier). Display packed.
Stock Euro GBP £
No. each each
52578 €20.07 £13.38
4
CLT5
Volkswagen Diesel Engine Crankshaft
Locking Tool
Expert Quality , for locking crankshafts on Lupo 3L
1.2TDI, Lupo 1.4TDI, Polo 1.4TDI, Golf 1.9TDI, Bora
1.9TDI and Passat 1.9TDI. diesel engines. Display packed
Stock Euro GBP £
No. Each each
71204 €17.10 £11.40
5
DTK-FORD
7 piece Ford Diesel Engine
Injection Timing Kit
Expert Quality , for use on Ford 1.6 and 1.8 diesel
injection engines. Kit is manufactured from mild steel
and chemically blacked. Display packed in handy plastic
case.
Stock Euro GBP £
No. per kit per kit
52576 €24.06 £16.04
6
CLT3
GM (Vauxhall/Opel) and Saab Diesel and
Petrol Engine Camshaft Locking Tool
Expert Quality , for locking single camshafts on GM
(Vauxhall/Opel) and Isuzu vehicles as below.
Manufactured from anodized aluminium. Display
packed.
Petrol engined vehicles: GM (Vauxhall/Opel) OHC 1.2, 1.4,
1.6, 1.8 & 2.0L, Saab 900 2.5L V6 & 9000 3.0L V6
Diesel engined vehicles: GM (Vauxhall/Opel) OHC 1.6 & 1.7L,
Isuzu 1.5 & 1.7L
Stock Euro GBP £
No. each each
69934 €21.66 £14.44
8
FWHT1
GM (Vauxhall/Opel) and Isuzu Diesel and
Petrol Engine Flywheel Holding Tool
Expert Quality , for holding flywheels on the GM
(Vauxhall/Opel) and Isuzu vehicles as below. Display
packed.
Petrol engined vehicles: GM (Vauxhall/Opel) OHC 1.2, 1.4,
1.6, 1.8 & 2.0L
Diesel engined vehicles: GM (Vauxhall/Opel) OHC 1.6 & 1.7D;
Isuzu 1.5 & 1.7D
Stock Euro GBP £
No. each each
71173 €5.34 £3.56
9
CLFH/KIT
8 piece Diesel and Petrol Engine
Camshaft/Flywheel Locking/Holding Kit
Expert Quality , comprehensive kit for locking or
holding camshafts and flywheels on many GM
(Vauxhall/Opel), Isuzu, Rover, Citroën, Peugeot, Saab
and Volkswagen petrol and diesel vehicles. Packed in
blow mould carrying case and display sleeve.
Stock Euro GBP £
No. per kit per kit
71189 €126.78 £84.52
10
section 2
diesel and petrol engine service tools

81
Prices are list, each and exclude VAT.
DIS
13mm Cranked Diesel Injection Spanner
Expert Quality . 13mm bi-hexagon single-ended spanner
cranked at 90°. Manufactured from chrome vanadium
steel hardened and tempered. Sold loose.
Stock Euro GBP £
No. Length each each
40138 200m €14.07 £9.38
7