Operating instructions

28881 Rev G 4 01-02
NOVUS REAR DIRECT VENT
Tools and building supplies normally required
for installation:
Saw Wall-finishing materials
Pliers Framing material
Hammer Surround
Phillips screwdriver Caulking material
Tape measure Gloves
Plumb line Framing square
Level Electric drill and bits
Safety glasses
Note: Minimum and maximum clearances must be
maintained at all times. Illustrations throughout these
instructions reflect typical installations and are for design
purposes only. Actual installation may vary slightly due
to individual design preferences.
The illustrations and diagrams used throughout these
installation instructions are not drawn to scale.
Typical Horizontal Installation
Typical Vertical Installation