Specifications

INSTALLATION
The sensor alarm is designed to be either mounted on a wall
or free standing placed on a flat surface – desk, shelf, cabinet,
etc.
When selecting the location for the sensor alarm, keep in
mind that the Passive Infra red Sensor is triggered by heat
and motion. To help you avoid false alarms, place your alarm
unit:
• where it will not be exposed to direct sunlight
• away from heat sources, such as heaters, radiators,
fireplaces, and exposed light bulbs
•
out of strong drafts, like those caused by central heating
vents or air conditioners
• so it does not detect your pets movements.
CHOOSING A MOUNTING LOCATION
Select a mounting location where the alarm is most likely to
detect an intruder. For best coverage we recommend placing
it in a corner at a height of about 5 to 6
1
/
2
feet (1.5 to 2
metres). At this height, the sensor alarm detects motion up to
25 feet (7.5 metres) away and from an angle of up to 110º.
MOUNTING THE ALARM
1. Choose the desired location, and remove the back cover.
2. Using the screws provided secure the back cover to the wall.
3. Clip the unit on the back cover and secure it by fastening
the screw at the bottom.
Note:
Your sensor alarm’s coverage depends on how high you place
it, the shape of the room, furniture placement, and so on.
Note:
To secure the unit in a corner,
install the screws into the thin
plastic circular area (knock-out
holes) located on the top
projecting edges of the back
cover
.
REMOTE CONTROL
RANGE
The remote control gives you
simple handheld control of your sensor alarm up to 36feet
(11metres).
- 5-
Internal corner
External corner