Instruction Manual

7
5. HEALTH & SAFETY INFORMATION
5.2 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Caution: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute is of the
correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced before
attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement must be
obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable should be disabled to prevent connection to a
live electrical outlet.
This appliance is Class I
†
and is designed for connection to an earthed power supply matching that
detailed on the rating label and compatible with the plug fitted.
Earthed : This product requires an earth connection to protect against electric shock from accessible
conductive parts in the event of a failure of the basic insulation.
Important: On products exceeding 2000W it is recommended that the power cable is fully extended
before a connection is made to the power supply. We do not recommend the use of extension cables
with this unit.