Instruction Manual

11. TROUBLESHOOTING

11.1 TROUBLESHOOTING

PROBLEM

Unit does not

operate

The dehumidifying

function doesn't

work

POSSIBLE CAUSES SOLUTION

Is the tank full indication

lamp blinking? (The tank is

full or in a wrong position.)

Is the temperature of the

room above 35 or below

5 ?

Is the air filter clogged?

Has the power cord been

disconnected?

Empty the water in the drainage

tank and then reposition the tank.

The protection device is

activated and the unit cannot be

started.

Clean the air filter as instructed

under "Cleaning the dehumidifier".

No air is discharged

Is the air filter clogged?

Is the outlet not open?

Clean the air filter as instructed

under "Cleaning the dehumidifier".

Open the air outlet

Operation is noisy

Is the unit tilted or unsteady? Move the unit to a stable, sturdy

location.

Is the air filter clogged? Clean the air filter as instructed

under "Cleaning the dehumidifier".

Is the intake duct or discharge duct

obstructed?

Remove the obstruction from the

discharge duct or intake duct.

Plug the power cord into the outlet.