Instruction Manual

4. Product Introduction

Stock No. 04568 04570

Part No. ESH5000PTC/B ESH9000PTC

Rated voltage 400V 400V

Rated input 5,000W 9,000W

Rated frequency 50Hz 50Hz

Rated current 7.2–7.6A 13.0–13.6A

Position settings

O 0W 0W

Fan only 50W 80W

Half power 3,300W 6,000W

Full power 5,000W 9,000W

Max. heat output 17,060 BTU 30,708 BTU

Dimensions W 300 x H 345 x D 235mm W 395 x H 455 x D 307mm

Heating area 48m³ 80m³

Thermal cut-out 75°C 70°C

Weight 4.32kg 6.9kg

– 5 –

4.2 Specication

4.1 Scope

This heater is intended to raise the ambient temperature

in garages and workshop environments and is suitable

for domestic and light commercial use only. Any other

application beyond the conditions established for use

will be considered misuse. Draper Tools accepts no

responsibility for improper use of this product.

Part of our core range, this product is suitable for

enthusiasts and tradespersons alike.

WARNING! This product is not a toy and must be

respected.

Read this manual in full before attempting to assemble,

operate or maintain the product, and retain it for later use.