MSDS

Material Safety Data Sheet
according to ANSI Z400.1- 2004 and 29 CFR 1910.1200
DRANO® MAX GEL CLOG REMOVER
Version 3
.
0
Print Date 10/03/2014
Revision Date 08/22/2012
MSDS Number 350000013008
SITE_FORM Number
30000000000000010072.002
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous chemicals present at or above reportable levels as defined by OSHA 29 CFR 1910.1200 or
the Canadian Controlled Products Regulations are listed in this table:
Chemical Name
CAS-No.
Weight percent
Sodium hypochlorite
7681-52-9
5.00 - 10.00
Sodium hydroxide
1310-73-2
1.00 - 5.00
Surfactant - Trade Secret
Mixture
1.00 - 5.00
For additional information on product ingredients, see www.whatsinsidescjohnson.com.
4. FIRST AID MEASURES
Eye contact
:
Protect unharmed eye. Remove contact lenses. Flush
immediately with plenty of water for at least 15 to 20 minutes.
Get medical attention immediately.
Skin contact
:
Flush immediately with plenty of water for at least 15 to 20
minutes. Get medical attention immediately. Remove
contaminated clothing and shoes. Wash clothing before reuse.
Thoroughly clean shoes before reuse.
Inhalation
:
Remove to fresh air. If not breathing, give artificial respiration.
Get medical attention immediately.
Ingestion
:
If swallowed, DO NOT induce vomiting unless directed to do so
by medical personnel. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
5. FIREFIGHTING MEASURES
Suitable extinguishing
media
:
Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Specific hazards during
firefighting
:
Container may melt and leak in heat of fire.
Special protective
equipment for firefighters
:
Wear suitable protective clothing and gloves.
Further information
:
Wear full protective clothing and positive pressure self-
contained breathing apparatus. In case of fire and/or explosion
do not breathe fumes.
2/8