MSDS

Material Safety Data Sheet
according to ANSI Z400.1- 2004 and 29 CFR 1910.1200
Drano Professional Strength Foamer
Version 2.0
Print Date 09/24/2012
Revision Date 06/02/2011 MSDS Number 350000004604
SITE_FORM Number
30000000000000003919.001
2/8
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous chemicals present at or above reportable levels as defined by OSHA 29 CFR 1910.1200 or
the Canadian Controlled Products Regulations are listed in this table:
Chemical Name CAS-No. Weight percent
Sodium hypochlorite 7681-52-9 1.00 - 5.00
Hydrogen Peroxide 7722-84-1 0.10 - 1.00
For additional information on product ingredients, see www.whatsinsidescjohnson.com.
4. FIRST AID MEASURES
Eye contact : Protect unharmed eye. Remove contact lenses. Flush
immediately with plenty of water for at least 15 to 20 minutes.
Get medical attention immediately.
Skin contact : Flush immediately with plenty of water for at least 15 to 20
minutes. Get medical attention immediately. Remove
contaminated clothing and shoes. Wash clothing before reuse.
Thoroughly clean shoes before reuse.
Inhalation : Remove to fresh air. If not breathing, give artificial respiration.
Get medical attention immediately.
Ingestion : If swallowed, DO NOT induce vomiting unless directed to do so
by medical personnel. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing
media
: Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Specific hazards during fire
fighting
: Container may melt and leak in heat of fire.
Further information : Wear full protective clothing and positive pressure self-
contained breathing apparatus. In case of fire and/or explosion
do not breathe fumes.
Flash point : Note: no data available
Lower explosion limit : Note: no data available