Manual

d. Assemble the retracting mechanism. Insert the guiding rod (with

its flats facing forward) into the guiding bushing from the side of the

large diameter hole, fit the return spring onto the guiding bushing

from the side of the rod and compress the spring so that the end of the

guiding rod with its flats comes out from under the spring; holding the

guiding rod in such a position insert it together with the spring and

the bushing into the lower hole of the shackle, then move the rod

forward along the facets of flats into the upper hole; release the

spring (its end should enter the shackle cup); fit the second return

spring onto the guiding bushing.

e. Assemble the magazine. Insert the follower and the spring into

the magazine body; compress the spring to fit the locking strip into

the body and, holding it in that position, put the magazine cover on

the body so that the lug of the locking strip enters the hole of the

cover.

f. Further on proceed with assembly as instructed in item 2.6.3.

Fig. 14.Firing and trigger mechanism:

1 - firing and trigger mechanism body; 2 - trigger

mechanism pin; 3 - trigger with rod; 4 - trigger

spring; 5 - sear; 6 - auto safety; 7 - hammer; 8 -

mainspring; 9 - hammer pin; 10 - magazine latch

pin; 11 - magazine latch; 12 - magazine latch

spring.