B6 Drag Pak Instructions

Step #18 - Works Edition Only
Step #17 - Works Edition Only
Step #16 - Works Edition Only
#6
B6 Drag Pak / Works Edition
Install wheelie bar adapter.
• (2) 3*16 button head screws
Install wheelie bar mount onto wheelie bar adapter.
When installing the wheelie bar mount install the 3*30
button head screw first. Next install the upper 3*12 button
head screw.
Install rear end assembly onto chassis using the
factory Team Associated hardware.
The Anti Roll Bar Kit requires DR10 or similar rear
a-arms that have eyelet mounts built into the rear
a-arm.