B6 Drag Pak Instructions

Step #6
Step #5
Step #4
#2
Install clip style body mounts on bumper. Body posts can be trimmed to
desired height.
• (2) 4-40 x 1/4 Button Head Screws.
B6 Drag Pak / Works Edition
Install factory front a-arms onto front
bulkhead
Install (2) spacers between the front a-arms and
the backside of the front bulkhead.
Install front hinge pin support.
• (2) 3*6 button head screws
• (2) 2.5*3 button head screws
Install front end support plate onto front bulkhead.
• (2) 3*6 countersunk screws
Install bell crank mount to the underside of the front end support plate.
• (2) 3*6 countersunk screws