User's Manual

29
Ethernet configuration
5 Ethernet configuration
5.1 Ports
Go to Configuration > Ethernet > Port > Ports page to set the Ethernet Ports.
FIGURE 23. Ethernet ports
5.2 Speed
Go to Configuration > Ethernet > Port > Speed page to set the Ethernet Port Speed Configura-
tion.
FIGURE 24. Ethernet port speed configuration
TABLE 13. Ethernet ports
Parameter Description
MTU The MTU of Lite is a fixed value: 1522.
Speed It shows the current speed of the port.
Admin Status By default the Admin Status of all ports is up, only the Admin Status of
Eth2 can be set to down.
Operation Status It displays the current port status which can be up or down.
TABLE 14. Ethernet port speed configuration
Parameter Description
Autoneg The autonegotiation is enabled by default. It can be configured to
disabled.
draft