User's Manual

13
Commissioning
FIGURE 4. Management IP
2.2.3 Setting the management VLAN
Go to Configuration > Management > Management VLAN tab (see Figure 5).
TABLE 5. Management IP
Parameter Description
Public IP Address Public IP is used to access Lite over Management VLAN (Tagged, typically using a
switch or other intranet connectivity). It is for in-band management.
Public IP Mask
Public Gateway
Private IP (Eth 1) Private IP is used for commissioning.
Private IP Mask (Eth
1)
Local Management
IP
Local Management IP is used to access Lite locally over one of the Ethernet ports
untagged, for example, from a PC running WebLCT. It is also for out-of-band man-
agement.
Local Management
IP Mask
MAC 1 Display the MAC addresses of Eth1, Eth2 and wireless port.
MAC 2
MAC 3
Node Type This field is used in chain site configuration. When it is changed to Node with P+E
output, the private IP would be automatically changed to 192.168.255.4, to avoid IP
address conflict in the chain site.
draft