User's Manual

Commissioning
12
2. Enter User Name and User Password, click Login. The home page of Link Viewer
appears.
FIGURE 3. Link Viewer
2.2.2 Setting the management IP
Go to Configuration > Management > IP tab (see Figure 4). The public management IP address
and local management IP address are to be set.
INFO
Don’t use IP address from 192.168.254.96 ~ 192.168.254.99. These 4 IP addresses are
reserved for internal use.
TABLE 3. Login parameters
User Name User Password
energetic wireless
readwrite Rwrite
readonly readonly
TABLE 4. System home
Parameter Description
System Name Configure the system name to identify the NE.
System Location Configure the system location for easy management.
System Contact Configure the contact information for easy management.
System Up Time Show the system start up time. It is read only.
System Description Configure the system description for easy management.
System ObjectID It is used to SNMP. The value is 1.3.6.1.4.1.7262.4.1.
System Temperature Show the current temperature. It is read only.
draft