Installation Guide

9
Before installation
• (Only needed when PoE+ function is required) 1 x Ethernet cable for LITE internal use (length:
0.12 m);
• (Only needed when external antenna is used) 2 x pre-assembled antenna cable for sub-6 GHz
with connectors (length options: 1 m, 2 m, 3 m, 4 m, 5 m); and
• 1 set of mounting kit.
FIGURE 2. Mounting kit items
INFO
How to attach the mounting kit to the equipment? The following steps will be used in the equip-
ment mounting steps.
Steps:
1. Attach item 1 to the back of the equipment using item 2, 3 and 4 as shown. Verify that the
orientation of the hole in item 1 is aligned with the elevation axis. Using tightening torque of
5.7 N/m.
Arm bracket
Qty: 1
SHEET 1 OF 4
Spring washer M5
Qty: 4
Item: 3
Bolt M5x16
Qty: 4
MT-120018/A only
Bolt M8x40
Qty: 4
Wall/Poll bracket
Qty: 1
Antenna/enclosure
base bracket
Qty: 1
Item: 1
Washer spring M8
Qty: 4
Flat washer M5
Qty: 4
Item:2
Clamping bracket
Qty: 1
Washer flat M8
Qty: 4
Bolt M8x70
Qty: 2
Nut M5
Qty: 4
Item: 4
Item: 5
Item: 10
Item: 8
Item: 6
Item: 12
Item: 13
Item: 11
Item: 9
Item: 7
Nut M8
Qty: 2