Installation Guide

13
Mounting Steps
3.2 Mounting on the pole (1’ ~ 1.75’ diameter)
Steps:
1. Attach the mounting kits to the equipment. Refer to Chapter 2 Before installation.
2. Pre-assemble the mounting bracket on the pole.
FIGURE 10. Step 2
3. Tighten the nut with spanner.
FIGURE 11. Step 3
4. Tighten the grounding cable in the equipment.
5. Install the grounding cable with the enclosed parts.
3.3 Mounting on the pole (1.75’ ~ 3’ diameter)
Steps:
1. Attach the mounting kits to the equipment. Refer to Chapter 2 Before installation.
2. Pre-assemble the mounting bracket on the pole.