Installation Guide

11
Mounting Steps
3 Mounting Steps
The equipment can be mounted in the following four options:
• Option 1: on the wall;
• Option 2: on the pole (1’ ~ 1.75’ diameter);
• Option 3: on the pole (1.75’ ~ 3’ diameter); or
• Option 4: on the pole (3’ ~ 4.55’ diameter).
3.1 Mounting on the wall
Steps:
1. Install the M6 x 60 expansion bolt in the wall.
FIGURE 5. Step 1
2. Attach the mounting kits to the wall by M6 x 60 expansion bolt.
FIGURE 6. Step 2
3. Attach the mounting kits to the equipment. Refer to Chapter 2 Before installation.