User's Manual

Commissioning
6
LITE, R1.0, Operation and Maintenance Guide, Issue 1
2.
Enter User Name admin (by default) and User Password sysmanager (by default) and
click Login. The home page of Link Viewer appears.
FIGURE 3.
Link Viewer
2.2.2 Setting the management IP
Go to Configuration > Management > IP tab (see Figure 4). The public management IP address
and local management IP address are to be set.
INFO
Don’t use IP address from 192.168.254.96 ~ 192.168.254.99. These 4 IP addresses are
reserved for internal use.
TABLE 3.
System home
Parameter Description
System Name Configure the system name to identify the NE.
System Location Configure the system location for easy management.
System Contact Configure the contact information for easy management.
System Up Time Show the system start up time. It is read only.
System Description Configure the system description for easy management.
System ObjectID
System Temperature Show the current temperature. It is read only.