User's Manual

LITE, R1.0, Operation and Maintenance Guide, Issue 1
5
Commissioning
2 Commissioning
2.1 Before commissioning
Before LITE system become operational, initial configuration steps need to be carried out first. And
the Commissioning wizard is recommended to be executed prior to the hardware installation on site.
The LITE system can be accessed by the Web Browser on a PC, such as Google Chrome (28.0 or
higher), Firefox (26.0 or higher), IE (9.0 or higher). If Firefox or IE is to be used, Adobe Flash Player
plug-in has to be installed first. (To download Adobe Flash Player, go to website http://
get.adobe.com/cn/flashplayer/.)
Before logging into the LITE Web interface, the network configuration of the PC must be set as
Figure 1. We suggest setting the PC IP address to 192.168.255.1 and subnet mask
255.255.255.248. This IP address is used to access LITE when the management PC is directly con-
nected to LITE system. By default, the private IP address of LITE is 192.168.255.3 and the subnet
mask 255.255.255.248.
FIGURE 1.
PC network configuration
2.2 Commission steps
2.2.1 Logging in
Steps
1.
Use the Web Browser to access the private IP address of LITE.
FIGURE 2.
Step 1