User's Manual

DragonWave Inc.
66
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
ecfm traceroute ethernet
mac
Initiate Linktrace message by providing the MAC Address of the MEP
or MIP.
Sequence:
ecfm traceroute ethernet mac <aa:aa:aa:aa:aa:aa> {domain
<domain-name(1..20)> | level <level-id(0-7)>} [vlan <vlan-id(1-
4094)>] [time-to-live <ttl-value(1-255)> press Enter
Where
mac <aa:aa:aa:aa:aa:aa> identifies the destination Mac address.
domain <domain-name(1..20)> identifies the domain name.
level <domain-name(1..20)> identifies the domain’s level.
vlan <vlan-id(1-4094)> identifies the service’s vlan id.
time-to-live <ttl-value(1-255)> identifies TTL value.
Note:
Mac Address of the MEP with specified target “mpid” must be
learned prior to the execution of the command.
ecfm traceroute ethernet
mpid
Initiate Linktrace message by providing MEPID of the destination
MEP of the MEP or MIP.
Sequence:
ecfm traceroute ethernet mpid <id> {domain <domain-
name(1..20)> | level <level-id(0-7)>} [vlan <vlan-id(1-4094)>]
[time-to-live <ttl-value(1-255)>
Where
mpid <id> identifies the MEP identifier of the remote MEP.
Other parameters are same as those in the command - ecfm ping
ethernet mac.
The system responds: (Example)
->ecfm traceroute ethernet mpid 41 level 4
Traceroute to Macaddress 00:10:94:00:00:11 in domain
MD_level_4 at level 4 with vlanId 0
------------------------------------------------------------------------
-
Hops Host Ingress MAC Ingress Action Relay
Action
Next Host Egress MAC Egress Action Fwd Status
------------------------------------------------------------------------
-
1 00:01:00:07:58:80:a3:37 - - RlyFDB
00:00:00:10:94:00:00:16 00:10:94:00:00:16 EgrOK Forwarded
2 00:00:00:10:94:00:00:16 - - RlyHit
00:00:00:10:94:00:00:11 00:10:94:00:00:11 EgrOK Terminal
MEP