User's Manual

Link Layer Discovery Protocol (LLDP)

Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4

ECFM CLI Command

Description

get ecfm running config

Displays the "set ecfm" commands necessary to restore the current

state of the database. This is for infomration purposes only, as the

system will automatically save this information on a "save mib".

Sequence:

get ecfm running config press Enter

The system responds: (Example)

->get ecfm running config

set ecfm on

set ecfm port 1 on

set ecfm start

set ecfm traceroute cache on

set ecfm mep archive-hold-time 200

set ecfm domain MD_level_7 level 7

set ecfm service MA_7_1 vlan 1071

set ecfm mep crosscheck mpid 70 vlan 1071

set ecfm mep crosscheck mpid 71 vlan 1071

set ecfm mep crosscheck mpid 72 vlan 1071

set ecfm mep crosscheck mpid 73 vlan 1071

set ecfm mep crosscheck mpid 74 vlan 1071

set ecfm mep level 7 mpid 70 vlan 1071 active

set ecfm cc level 7 vlan 1071 interval ten-sec

set ecfm cc enable level 7 vlan 1071

get ecfm port

Displays the ethernet CFM port-specific parameters.

Sequence:

get ecfm port [port-number] press Enter

Example:

get ecfm port press Enter

The system responds:

ecfm Status : Enabled

LLC Encapsulation : Disabled

MEPs Configured : 5

MIPs Configured : 0