User's Manual

Link Layer Discovery Protocol (LLDP)
57
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
get ecfm maintenance-
points local detail
Displays the detailed information about the maintenance end
points(MEP) locally configured on the device. The information
includes thevarious MEPs capabilities, states, threshold values, etc.
Sequence:
get ecfm maintenance-points local detail {mpid<mepid(1-
8092)> | mac <aa:aa:aa:aa:aa:aa>} [domain <domain_name> |
level<level-id(0-7)>] [unaware | vlan <integer(1-4094)>] press
Enter
Where
mpid identifies the MEP identifier
mac identifies the MEP’s mac address
domain identifies a domain
level identifies the level of Maintenance Domain
unware identifies the service with no Vlan
vlan identifies a Vlan ID
Example:
->get ecfm maintenance-points local detail mpid 70
The system responds: (Example)
MPID: 70 MdLevel: 7 VLAN: 1071 Dir: Down
------------------------------------------------
Out-Of-Service : Disabled
RDI Capability : Enabled
Loopback Capability : Enabled
Multicast LBM Reception Capability : Enabled
Multicast TST Reception Capability : Disabled
One-Way DM Reception Capability : Disabled
DMR Optional Fields : Disabled
Delay Threshold : -
AIS Capability : Disabled
AIS Condition : Disabled
LCK Condition : Disabled
LCK Client Mac Address :
00:00:00:00:00:00
AIS Client Mac Address :
00:00:00:00:00:00
Near-End Loss Threshold : -
Far-End Loss Threshold : -