User's Manual

Link Layer Discovery Protocol (LLDP)
53
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
get ecfm errors
Display continuity check error conditions logged on a device since it
was last cleared.
Sequence:
get ecfm errors press Enter
The system responds:
MEP-ID : 70
Level VLAN RMEP-ID Current defect type
----- ---- ------- -------------------
7 1071 71 CCM Life time expired
7 1071 72 CCM Life time expired
7 1071 73 CCM Life time expired
7 1071 74 CCM Life time expired
get ecfm error-log
This is an Y.1731 command. Displays the Error Log containing the
information about the errors encountered on the MEP.
Sequence:
get ecfm error-log [domain <domain-name(1..20)> |
levelid<level-id(0-7)>] [unaware | vlan <vlan-id(1-4094)>] press
Enter
Where
domain identifies a domain
levelid identifies the level of Maintenance Domain
unware identifies the service with no Vlan
vlan identifies a Vlan ID
The system responds error logs if error exists.
Example:
->get ecfm error-log
MEP-ID : 51
Time Of Occurrence RMEP-ID Error Type Error Status
-------------------------------------------------------------------------------------------
21 Oct 2008 15:49:15 50 loss of continuity Entry
21 Oct 2008 15:51:54 50 loss of continuity Exit