User's Manual

Link Layer Discovery Protocol (LLDP)
51
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
get ecfm configuration-
errors
Displays the ecfm configuration-related errors (CFM leak, Conflicting
VlanIds, Excessive Levels, etc).
The default will show all port’s error message if error configuration
exists.
Sequence:
get ecfm configuration-errors vlan <vlan-id(1-4094)>]
[interface <interface-id>] press Enter
Where
vlan {<vlan-id(1-4094)> specifics a Vlan ID
interface <interface-id> specifics a port number
The system responds error message if error configuration exists.
The ecfm configuration error type:
CFM Leak
Conflicting Vids
Excessive Levels
Overlapped Levels
Example:
->get ecfm configuration-errors
Configuration Errors
---------------------------------------------
interface gigabitethernet: 0/1 VLAN : 1005
Excessive Levels
---------------------------------------------
interface gigabitethernet: 0/1 VLAN : 1006
Excessive Levels
---------------------------------------------
interface gigabitethernet: 0/1 VLAN : 1071
Excessive Levels